USL-5P@Kernel 2.6.19
ようやく起動した。これで"ほぼ"PCと同じ環境に追いついた。そのうち20なんて出てくるんだろうけど。
自分用パッチを後から作っておくこと。
その後…
しかしAX88178は一発で動かず…。
Linux version 2.6.19-landisk (root@usl-5p) (gcc version 3.4.4 20050314 (prerelea
se) (Debian 3.4.3-12)) #4 Mon Jan 1 20:41:24 JST 2007
I-O DATA DEVICE, INC. "LANDISK Series" support.
On node 0 totalpages: 16384
DMA zone: 128 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 16256 pages, LIFO batch:3
Normal zone: 0 pages used for memmap
Built 1 zonelists. Total pages: 16256
Kernel command line: ro root=301 mem=64M console=ttySC1,9600
PID hash table entries: 256 (order: 8, 1024 bytes)
Interval = 83333
Using tmu for system timer
Console: colour dummy device 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 62720k/65536k available (1652k kernel code, 2772k reserved, 372k data, 7
6k init)
PVR=04050005 CVR=20480000 PRR=00000113
I-cache : n_ways=2 n_sets=256 way_incr=8192
I-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
D-cache : n_ways=2 n_sets=512 way_incr=16384
D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
CPU: SH7751R
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Autoconfig PCI channel 0x8c1c3bf8
Scanning bus 00, I/O 0x00004000:0x00044000, Mem 0xfd000000:0xfe000000
00:00.0 Class 0200: 10ec:8139 (rev 20)
I/O at 0x00004000 [size=0x100]
Mem at 0xfd000000 [size=0x100]
00:02.0 Class 0c03: 1033:0035 (rev 43)
Mem at 0xfd001000 [size=0x1000]
00:02.1 Class 0c03: 1033:0035 (rev 43)
Mem at 0xfd002000 [size=0x1000]
00:02.2 Class 0c03: 1033:00e0 (rev 04)
Mem at 0xfd003000 [size=0x100]
PCI: Using configuration type 1
DMA: Registering DMA API.
DMA: Registering sh_dmac handler (4 channels).
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 2048 bind 1024)
TCP reno registered
Allocate Area5/6 success.
LANDISK and USL-5P Button, LED and GIO driver initialized
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
SuperH SCI(F) driver initialized
sh-sci: ttySC0 at MMIO 0xffe00000 (irq = 25) is a sci
sh-sci: ttySC1 at MMIO 0xffe80000 (irq = 43) is a scif
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
eth0: RTL-8139C+ at 0xfd000000, 00:a0:b0:65:15:b9, IRQ 5
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: SuperH generic IDE interface
DEBUG: hw_setup
DEBUG: hw_setup return
DEBUG: hw_setup
DEBUG: hw_setup return
ide-sh: Attempting to register ide2 when only 1 interfaces are available.
Probing IDE interface ide0...
hda: BN-SD Series, CFA DISK drive
hdb: no response (status = 0xa1), resetting drive
hdb: no response (status = 0xa1)
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 10
hda: max request size: 128KiB
hda: 1002496 sectors (513 MB) w/0KiB Cache, CHS=3916/8/32
hda:hda: set_geometry_intr: status=0x51 { DriveReady SeekComplete Error }
hda: set_geometry_intr: error=0x04 { DriveStatusError }
ide: failed opcode was: unknown
hda1 hda2
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: irq 5, io mem 0xfd003000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 7, io mem 0xfd001000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 8, io mem 0xfd002000
usb 1-3: new high speed USB device using ehci_hcd and address 2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-3: configuration #1 chosen from 1 choice
RICHO RS5C313 Real Time Clock Driver v1.20
rtc-rs5c313 rtc-rs5c313.0: rtc intf: sysfs
rtc-rs5c313 rtc-rs5c313.0: rtc intf: proc
rtc-rs5c313 rtc-rs5c313.0: rtc intf: dev (254:0)
rtc-rs5c313 rtc-rs5c313.0: rtc core: registered rs5c313 as rtc0
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
rtc-rs5c313 rtc-rs5c313.0: setting the system clock to 2007-01-01 11:47:37 (1167
652057)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 76k freed
EXT3 FS on hda1, internal journal
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
scsi 0:0:0:0: Direct-Access SEAGATE ST650211USB 4.02 PQ: 0 ANSI: 2
SCSI device sda: 9767520 512-byte hdwr sectors (5001 MB)
sda: Write Protect is off
sda: Mode Sense: 73 00 00 08
sda: assuming drive cache: write through
SCSI device sda: 9767520 512-byte hdwr sectors (5001 MB)
sda: Write Protect is off
sda: Mode Sense: 73 00 00 08
sda: assuming drive cache: write through
sda: sda1
sd 0:0:0:0: Attached scsi removable disk sda
usb-storage: device scan complete
